OAO NPP “Start” » Products » Relays and Switches

RGK56

This is a low-current, electromagnetic, monostable, not polarized, not hermetic reed relay with one change over magnetic operated contact (sealed contact) MKC-14104 and with an inbuilt diode for dampening of Faraday voltage, designed for switching DC electrical circuits with switching frequency to 10000 Hz;

manufactured in accordance with state standard 16121-86 and ИДЯУ.647613.054 ТУ.

Environmental ratings: cold temperate conditions and B.

How to order: Relay RGK 56 ИДЯУ.647613.054 ТУ.

Technical Parameters

Table 1

Model	Rated voltage, V	Operate voltage, V, not more	Release voltage, V, not less	Coil resistance, Ohm
ИДЯУ.647613.054-06	3±0,3	2,1	0,3	115±23
ИДЯУ.647613.054-01,-07	5±0,5	3,5	0,5	200±40
ИДЯУ.647613.054-02,-08	6±0,6	3,7	0,6	500±100
ИДЯУ.647613.054-03,-09,-04,-10	12±1,2	8,1	1,1	1000±200
ИДЯУ.647613.054-05,-11	27±2,7	19,0	2,7	2500±500

Switching Modes

Table 2

Switching Range		Switching power, W, not more	Form of load	Current Type	Switching Frequency, Hz	Number of Switching Cycles		Value 95% of recourse, not less
I, А	U, V					∑	t=85°С
5·10^-6 -10^-2	5·10^-2 - 5	5	active and inductive t ≤ 0,015 с;	Const&Var	50	1,0·10⁶	5,0·10⁵	2,0·10⁶
10^-2 -2,5·10^-1	5 - 36		active			5,0·10⁵	2,5·10⁵	1,0·10⁶
2,5·10^-1 - 0,5	5 - 60	10				1,0·10⁵	5,0·10⁴	2,0·10⁵

Technical Specifications

Table 3

Contact resistance, Ohm, not more	0,3
Operate time, ms, not more	0,5
Release time, ms, not more	2,0
Insulation Resistance between relay circuits MOhm , not less - at normal ambient temperature - at maximal operating temperature -at a higher humidity, frost-dew, dew - in conditions of salt fog, mold fungi, static dust(Model В)	500 10 10 5
Insulation relay strength (effective value) V between open contacts : - at normal ambient temperature -at a higher humidity, frost-dew, dew - at atmospheric under-presssure - in conditions of salt fog, mold fungi, static dust(Model В) between current-carrying circuits, between current-carrying circuits and housing: - at normal ambient temperature -at a higher humidity, frost-dew, dew - at atmospheric under-presssure - in conditions of salt fog, mold fungi, static dust(Model В)	127 95 110 95 500 200 250 200
Weight, g, not more	2,8

Schematic Circuit Diagram	External Dimensions

Operating Conditions

Table 4

Ambient temperature, °С	from minus 60 to plus 100
Atmospheric pressure, Pa, (mm of Mercury)	6,7·10²…3,0·10⁵ (5…2280)
Relative humidity at 35 °С, %	to 98
Vibration loads: over 1 to 2000 Hz	With acceleration amplitude 200 m/sec² (20g)
Shock loads - single shocks, duration 2±0,1 мс - single shocks, duration 10±2 мс	9 shocks with acceleration to 5000 m/sec² (500g) 4000 shocks with acceleration to 400 m/sec² (40g)
Linear acceleration, m/sec²	to 500 (50g)