REP26
This is an electromagnetic, slave relay, designed for control circuits of AC drive with rated voltage to 380 V and frequency 50(60) Hz, manufactured in accordance with state standard 15150 and ИГФР.647115.069ТУ.
Environmental ratings: cold temperate, cold and tropical climate.
How to order: Slave relay REP26-004А526042-40УХЛ4 ТУ16-93 ИГФР.647115.069ТУ.
Model Identification Marks
26 – Family
004 - Type and number of contacts
A – Class of switching wear resistance :
A - Class A
D – Class D (only for types 300 and 400);
5 – Identification marks of current type in the connecting coil circuit and kind of return to initial position:
1 – AC wlth voltage coil, monostable
5 – DC with voltage coil, monostable
6 – DC-coil, monostable
26 – Bonding technique model identification and termination technique
41 – Identification of coil voltage or coil current
0 – Identification of supplemental elements:
0 – without supplemental elements;
2 – with manual manipulator;
5 – with electrical indicator and manual manipulator, for U = 24V; = 110V; ~ 220V;
6 – with protective diode and manual manipulator, for U < 24V;
40 – Ingress protection rating – IP according to State standard 14254
00 – for Class D
40 – for Class A
УХЛ4 – Models designed for certain ambient conditions according State standard 15150;
УХЛ – temperate and cold climate;
O – for tropical climate;
4 – Placement category according to State standard 15150.
Number of Contacts
Table 1
Type |
Total number |
Make contact |
Break contact |
Change- over contact |
001 |
1 |
|
|
1 |
010 |
1 |
|
1 |
|
100 |
1 |
1 |
|
|
002 |
2 |
|
|
2 |
020 |
2 |
|
2 |
|
110 |
2 |
1 |
1 |
|
200 |
2 |
2 |
|
|
003 |
3 |
|
|
3 |
120 |
3 |
1 |
2 |
|
210 |
3 |
2 |
1 |
|
300 |
3 |
3 |
|
|
004 |
4 |
|
|
4 |
220 |
4 |
2 |
2 |
|
310 |
4 |
3 |
1 |
|
400 |
4 |
4 |
|
|
Models according to Bonding Technique
Table 2
Identification |
Socket availability |
Termination technique |
16 |
not available |
lamellas for soldering |
18 |
not available |
lamellas for “fasten” |
76 |
not available |
lamellas for printing |
21 |
available |
screw jacks |
26 |
available |
lamellas for soldering |
78 |
available |
lamellas for printing |
Identification of Coil Voltage
Table 3
DC |
AC Frequency 50 Hz |
AC Frequency 60 Hz |
|||
identification |
value |
value |
value |
identification |
value |
01 |
6 V |
21 |
12 V |
38 |
12 V |
Identification of Coil Current
Table 4
identification |
value |
identification |
value |
identification |
value |
05 |
0,25 А |
10 |
0,80 А |
15 |
2,50 А |
Technical Parameters
Table 5
Parameter name |
Unit of measure |
Design rule |
Measurement conditions |
Switching voltage range |
V |
~ 5 - 380 |
|
Rated contact current |
А |
10 |
from minus 40°С to plus 40°С |
Minimal operating contact current |
А |
0,05 |
when U=5В |
Tolerant through contact current |
А |
160 |
within 1с |
Tolerant variation limit of drive circuit voltage |
% |
+5 |
|
Watt consumption |
W |
1,5 |
t=(20±5)°С |
Operate time, not more |
second |
0,03 |
t=(20±5)°С |
Release time, not more |
second |
0,03 |
t=(20±5)°С |
Mechanical wear resistance |
Cycle million |
30,0 |
|
Tolerance breaking current-power limit - with DC |
VА VА |
1600 |
inductive load |
Model Schematic Circuit
|
|||
001 |
010 |
100 |
|
002 |
020 |
200 |
110 |
003 |
120 |
300 |
210 |
004 |
220 |
310 |
400 |
Terminal Position
On relay and on the socket for soldering |
On the socket with screw jacks |
||
Lamellas Relay for Soldering or for N-pin Connector Jack of “Fasten” Type
Table 6
Model according contact number |
V, mm, not more |
Weight, kg, not more |
1; 2; 3 |
29 |
0,07 |
4 |
34 |
0,08 |
Lamellas Socket Relay for Soldering
Table 7
Model according contact number |
V, mm, not more |
V1* |
Weight, kg, not more |
1; 2; 3 |
31 |
24 |
0,09 |
4 |
36 |
30 |
0,1 |
Socket Relay with a Screw Jack
Table 8
Model according contact number |
B, mm, not more |
Weight, kg, not more |
1; 2; 3 |
31 |
0,135 |
4 |
37 |
0,145 |
Mounting Wafer
(For mounting relay with screw jacks )
Table 9
Identification |
В, mm |
V1, mm |
Weight, kg, not more |
РЭП 26-003... |
43max |
35±0,3 |
0,012 |
РЭП 26-004... |
48max |
40±0,3 |
0,014 |
Spotting of Relay Lamellas for Print Mounting
Table 10
Model |
Picture |
V, mm |
N, mm |
N, mm |
|
Socket availability |
Contact number |
||||
without socket |
1, 2, 3 |
a |
29 |
34 |
3 |
4 |
b |
34 |
34 |
3 |
|
with socket |
1, 2, 3 |
а |
31 |
36 |
4 |
4 |
b |
36 |
36 |
4 |