RPS47

This is a low-current, electromagnetic, polarized, hermetically sealed, two-position relay with four change-over contacts;

designed for switching DC electrical circuits with frequency to 10000 Hz;

manufactured according to GOST 16121-86 and ЯЛО.452.093 ТУ.

Environmental ratings: humid conditions.

Ordering data: Relay RPS 47 РС4.520.764 ЯЛО.452.093 ТУ

Table 1

Type	Model	Rated voltage, V	Coil Resistance I and II, Ohm	Operate Voltage in Delivery Time, V
RPS 47	РС4.520.764	15	200±40	5,0 – 8,2
RPS 47Т	РС4.520.765
RPS 47	РС4.520.765-01	24; 27	400±80	7,2 – 12,2
RPS 47Т	РС4.520.764-01
RPS 47	РС4.520.764-02	27	740±148	9,0 – 15,0
RPS 47Т	РС4.520.765-02

Table 2

Operate Time, ms, not more	5
Contact Resistance of Electrical Circuit when Voltage = (6±1)V and amperage =(10±1)mА, Ohm, not more	0,25
Dielectric Strength between Current Carrying Circuits (effective value), V - at normal ambient temperature - at high humidity, silver thaw, dew - at atmospheric under-pressure - in conditions of salt fog and mold & fungi, static dust (climate model T)	220 150 150 150
Dielectric Strength between Current Carrying Circuits and Package (effective value),V - at normal ambient temperature - at high humidity, silver thaw, dew - at atmospheric under-pressure - in conditions of salt fog and mold & fungi, static dust (climate model T)	220 150 150 150
Dielectric Strength between Coil and Package (effective value), V - at normal ambient temperature - at high humidity, silver thaw, dew - at atmospheric under-pressure - in conditions of salt fog and mold & fungi , static dust (climate model T)	300 180 180 180
Insulation Resistance between Electrical Circuits, mOhm, not less: - at normal ambient temperature - at maximal operating temperature In Conditions of High Humidity, Silver Thaw, Dew: - between coils and package - between electrical circuits and package in conditions of salt fog and mold & fungi , static dust (climate model T) - between coils and package - between electrical circuits and package	200 20 5 10 5 10
Weight, g	12

Table 3

Switching Range		Form of load	Current type	Switching Frequency,Hz, not more	Number of switching cycles
I,А	U,V	Form of load	Current type	Switching Frequency,Hz, not more	∑	t=+125°C
5·10^-6 ÷ 10^-3	0,05 ÷ 10	Active	Var & const	5*	10⁵	0,5·10⁵
10^-3 ÷ 0,1	0,5 ÷ 36	Active	Const	5*	10⁵	0,5·10⁵
10^-2 ÷ 1,0	6 ÷ 36	Active	Const	5*	10⁵	0,5·10⁵
10^-2 ÷ 0,15	1,2 ÷ 60	Active	Var ≤1100Hz	3*	5·10³	2,5·10³
5•10^-3 ÷ 0,15	1,2 ÷ 36	Inductive τ <0.005 c	Const	5*	10⁵	0,5·10⁵
0,15 ÷ 0,5	1,2 ÷ 36	Inductive τ <0.005 c	Const	1	5·10³	2,5·10³
0,05 ÷ 0,25	1,2 ÷ 36	Inductive τ <0.015 c	Const	1	10⁴	0,5·10⁴
1,0 ÷ 1,5	6 ÷ 30	Active	Const	1	2·10³	-------

* At ambient temperature over 100°С the switching frequency is not more than 1Hz

Schematic Circuit Diagram	External and Mounting Dimensions

Table 4

Ambient temperature, °С	from minus 60 to plus 125
Relative humidity at t ≤ 35°С, %	to 98
Sinusoidal Vibration: - over 0,5 to 10Hz - over 10 to 50Hz - over 50 to 3000Hz - over 3000 to 4000Hz - over 4000 to 5000Hz	with amplitude to 3,5 мм with amplitude to 2 мм with acceleration to 200 m/sec² (20g) with acceleration to 350 m/sec² (35g) with acceleration to100 m/sec² (10g)
Atmospheric pressure, Pa, (mm of Mercury)	13·10^-5…297193 (10^-6…2280)
Shock loads: - single shocks duration 0,1-2 мс - single shocks duration 1-5 мс - multiple shocks duration 1-5 мс - multiple shocks duration 2-10мс	3 with acceleration to 5000 m/sec² (500g) 9 with acceleration to 1500 m/sec² (150g) 4000 with acceleration to 750 m/sec² (75g) 10000 with acceleration to 400 m/sec² (40g)
Shock resistance	shocks with acceleration to 1000 m/sec² (100g)