RPS45

This is a low-current, electromagnetic, polarized, bistable, hermetically sealed relay with two change-over contacts;
designed for switching DC & AC electrical circuits with frequency to 10000 Hz;
manufactured according to GOST 16121-86 and ЯЛ0.452.081 ТУ.
Environmental ratings: temperate, cold climate (RPS45, RPS 45-1)
and tropical (humid) climate (RPS 45T, RPS 45-1T), and models with
high hermetic degrees ( with the symbol «ð»).
Relays are different depending on the type of terminal structure: RPS 45 have pin-type terminals; RPS 45-1 have planar terminals.
Ordering data: Relay RPS 45-1T РС4.520.756-11 ЯЛ0.452.081 ТУ with the symbol «ð».
Technical Parameters
Table 1
Type |
Models |
Rated Voltage, V |
Coil Resistance I,, II, Ohm |
Operate Voltage, V |
Max. Voltage when Operate Time =5ms, V |
Contact Resistance when Urated= (6±1) V and I= (10±1)mА, Ohm, not more |
RPS45 |
РС4.520.755; РС4.520.756; РС4.520.755-12; РС4.520.756-12; |
|
|
3,6 - 6,6 |
10,2 |
0,25 |
RPS45 |
РС4.520.755-01; РС4.520.756-01; РС4.520.755-15; РС4.520.756-15 |
|
|
0,95 - 1,55 |
2,7 |
0,25 |
RPS45 |
РС4.520.755-02; РС4.520.756-02; РС4.520.755-14; РС4.520.756-14 |
|
|
1,35 - 2,1 |
3,6 |
0,25 |
RPS45 |
РС4.520.755-03; РС4.520.756-03; РС4.520.755-13; РС4.520.756-13 |
|
|
2,25 - 3,5 |
5,7 |
0,25 |
RPS45 |
РС4.520.755-04; РС4.520.756-04 |
|
|
5 - 8,2 |
13,5 |
0,25 |
RPS45 |
РС4.520.755-05: РС4.520.756-05; РС4.520.755-11; |
|
|
9 - 15 |
21,6 |
0,25 |
RPS45 |
РС4.520.755-06; РС4.520.756-06; РС4.520.755-20; РС4.520.756-20 |
|
|
0,95 - 1,55 |
2,7 |
0,5 |
RPS45 |
РС4.520.755-07; РС4.520.756-07; РС4.520.755-19; РС4.520.756-19 |
|
|
1,35 - 2,1 |
3,6 |
0,5 |
RPS45 |
РС4.520.755-08; РС4.520.756-08; РС4.520.755-18; РС4.520.756-18 |
|
|
2,25 - 3,5 |
5,7 |
0,5 |
RPS45 |
РС4.520.755-09; РС4.520.756-09 |
|
|
5 - 8,2 |
13,5 |
0,5 |
RPS45 |
РС4.520.755-10; РС4.520.756-10; РС4.520.755-16; РС4.520.756-16 |
|
|
9 -15 |
21,6 |
0,25 |
RPS45 |
РС4.520.755-21; РС4.520.756-21; РС4.520.755-17; РС4.520.756-17 |
|
|
3, 6 - 6,6 |
10,2 |
0,5 |
Technical Specifications
Table 2
Operate time, ms, not more |
5,0 |
Insulation Resistance between Relay Circuits, mOhm, not less |
200 |
Test Voltage, V |
180 150 |
Weight, g, not more |
3,6 |
Switching Modes
Table 3
Switching range |
Current type |
Form of load |
Switching Frequency, Hz |
Number of switching cycles |
||
I, А |
U, V |
∑ |
t=125 °С |
|||
0,5·10-5 - 10-2 |
0,05 - 10 |
Var & const |
Active |
5 |
105 |
0,5·105 |
0,1·10-2 - 0,1 |
0,5 - 36 |
Const |
||||
0,5·10-5 - 0,5·10-2 |
0,05 - 10 |
Inductive |
3 |
|||
0,5·10-2 - 0,5·10-1 |
2 - 36 |
1 |
5·104 |
2,5·104 |
||
0,5·10-1 - 0,5 |
0,5 - 36 |
Const |
Active |
5 |
105 |
0,5·105 |
0,1·10-1 - 0,15 |
6 - 60 |
Var |
3 |
5·103 |
2,5·103 |
|
0,5·10-1 - 0,25 |
0,05 - 36 |
Const |
Inductive |
1 |
104 |
0,5·104 |
0,1·10-1 -6·10-1 |
6 - 36 |
Active |
5 |
105 |
0,5·105 |
|
0,1·10-1 -6·10-1 |
6 - 36 |
Inductive |
1 |
104 |
0,5·104 |
|
0,5 -1,0 |
6 - 36 |
Active |
5 |
Schematic Circuit Diagram |
External Dimensions |
||
RPS 45, RPS 45-1 |
RPS 45 |
RPS 45-1 |
|
|
|
|
|
Operating Conditions
Table 4
Ambient temperature, °С |
from minus 50 to plus 125 |
Relative Humidity at t ≤40°С, % |
to 98 |
Atmospheric pressure, Pa, (mm of Mercury) |
13·10-7…3,04·105 (10-8…2,3·103) |
Sinusoidal Vibration: |
|
Mechanical Shocks: |
|